Get Horny in Minnesota MN on a Vikings Viking Horn DTF Transfer Small or Large for shirts, caps, hats, pockets, pants, etc... Iron On Patch 1 Small Patch $3.99 2 Small Patches $5.99 10 Small Patches $19.99 20 Small Patches $29.99 1 Large Patch $13.99 Free Shipping

Get Horny in Minnesota MN on a Vikings Viking Horn DTF Transfer

Purchase options:

1 Small Patch $3.99 - Letter Post with no tracking

2 Small Patches $5.99 - Letter Post with no tracking

10 Small Patches $19.99

20 Small Patches $29.99

1 Large Patch $13.99

Size shown in pictures

The background is transparent and the letters H O R N and Y are transparent. Works best on a purple shirt.

Recommended Pressing Instructions for Heat Press:

(Note: All heat presses are different so time and temperature recommendations may have to be adjusted)

1st Press: 300-310 degrees for 10-15 seconds medium pressure. Each heat press does vary and some experimenting may be necessary for optimal results.

Peel Cold: The transfer should cool completely to the touch before removing the film. (rubbing the film with cloth is recommended). Peel after completely cold. Peel slowly and gently.

2nd Press: Cover with Teflon (for shiny look) or parchment paper (for matte look), 300-310 degrees for 5-10 sec, medium pressure.

3rd Press (optional if needed): Cover with Teflon (for shiny look) or parchment paper (for matte look), 300-310 degrees for 5-10 sec, medium pressure.

Note: You can press multiple times if the transfer is not adhering to the fabric, just allow the fabric time to cool in between.

If you can see the fabric grain on the transfer you know it is locked in good on the material.

Polyester/Blend Fabric: Lower the temperature 300-310 degrees and shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate. You can press multiple times if the transfer is not adhering to the fabric.

100% Polyester: Lower the temperature to 250-285 degrees and shorten press time to 3-8 seconds, this fabric can take some tweaking with your press to determine the best time, temp and pressure. We suggest practicing to determine the proper settings. You can press multiple times if the transfer is not adhering to the fabric, just allow the fabric time to cool in between.

Recommended Iron On Instructions:
 

1st Press: 300-330 degrees for 15 to 30 seconds heavy pressure. Place parchment paper over the top.  Press down hard.
 

Peel Cold: The transfer should cool completely to the touch before  removing the film. (rubbing the film with cloth is recommended). Peel  after completely cold. Peel slowly and gently.
 

2nd Press: Cover with Teflon (for shiny look) or parchment paper (for  matte look), 300 - 330 degrees for 10 to 20 seconds, heavy pressure.  Press down hard.
 

3rd Press (optional if needed): Cover with Teflon (for shiny look) or  parchment paper (for matte look), 300 - 330 degrees for 10 to 20  seconds, heavy pressure. Press down hard.
 

Note: You can press multiple times if the transfer is not adhering to the fabric, just allow the fabric time to cool in between.
If you can see the fabric grain on the transfer you know it is locked in good on the material.
 

Polyester/Blend Fabric: Lower the temperature and shorten time, as these  fabrics absorb heat at much faster rate. You can press multiple times  if the transfer is not adhering to the fabric.
 

100% Polyester: Lower the temperature and shorten press time. You can  press multiple times if the transfer is not adhering to the fabric, just  allow the fabric time to cool in between. 

No returns accepted

Payment links will be added shortly